Back to Products
Dual-Site Monitoring & Control
AccuDose Links
Automated tank and well monitoring system that keeps water storage at target levels by automatically calling remote well sites to fill — all over cellular, with no on-site networking required.
Lifetime Warranty
Global LTE-M
Automated Fill Control
Real-Time Alarms
2
Sites Included
∞
Add-On Sites
IP68
Protection Rating
∞
Warranty
Two Sites. One System. Fully Automated.
Links connects a Destination controller (tank) with a Source controller (well or pump station) over cellular. When the tank drops to your configured setpoint, Links automatically calls the well to start — and stops it when the tank is full. No networking, no SCADA, no manual intervention required.
What’s Included
- Two RMC-2000 controllers — one Destination (tank) and one Source (well or pump station)
- Configurable start and stop setpoints — automatically manages the full fill cycle
- Call-to-run confirmation — verifies the well actually ran, with immediate alarm if it failed
- Built-in global SIM on each unit — connects over Verizon, AT&T, and T-Mobile automatically
- Expandable — add unlimited additional sites at the cost of one controller and server plan each
- Real-time SMS and email alarm notifications with full historical trend reporting
- Existing AccuDose controllers can be upgraded to Links — pay server plan difference only
How It Works
01
Monitor the Tank
The Destination controller tracks tank level continuously. When it drops to the configured start setpoint, it sends a fill call to the Source controller.
02
Call the Well
The Source controller receives the fill call and activates the well or pump. It monitors run status to confirm the well is operating correctly.
03
Verify & Alert
Links confirms the well ran when called. If the well was called but failed to run, an immediate alarm is sent to operators via SMS and email.
04
Stop When Full
When the tank reaches the stop setpoint, the Source controller stops the well. The full fill cycle is logged for historical reporting.
AccuDose Links
Configure Your System
Select your options below, then request a quote
Your Configuration
ProductAccuDose Links
Specifications
Full Technical Specifications
Complete system, mechanical, electrical, and platform specifications for AccuDose Links.
Download Data SheetSystem
Configuration
Destination + Source Controllers (2× RMC-2000)
Additional Sites
Unlimited — one controller + plan per site
Upgrade Path
Existing AccuDose controllers upgradeable — pay server plan difference only
Mechanical
Base
Polycarbonate
Cover
Polycarbonate
Gasket
Continuous silicone
Assembly Screws
Stainless steel
NEMA Rating
1, 2, 3, 3R, 3RX, 3X, 4, 4X, 5, 6, 6P, 12, 13
IP Rating
IP65, IP66, IP67, IP68
Electrical
AC Power Input
85–265V AC, max 15W
DC Power Input
24V DC ±10%, max 15W
Digital Inputs
Dry contact to ground
Operating Temperature
-20°C to +60°C (-4°F to +140°F)
Connectivity & Platform
Cellular Technology
LTE-M (Cat-M1)
SIM
Built-in global SIM (per unit)
Carrier Support
Verizon, AT&T, T-Mobile (automatic selection)
Cloud Dashboard
Included — real-time data, trends, alarms
Alarm Delivery
SMS & Email
Server Plans
3-Year, 5-Year — per controller
Warranty
Lifetime