Agriculture - AccuDose

Agriculture

Agriculture Remote Monitoring Systems — AccuDose
Agriculture

Remote Monitoring for
Agricultural
Infrastructure

Farm managers and agricultural operators are replacing expensive precision agriculture platforms and disconnected sensors with AccuDose — getting real-time visibility across irrigation systems, wells, pump stations, and storage tanks without the complexity.

Cellular-based monitoring — works on remote farms with no on-site internet
No complex SCADA infrastructure or programming required
Real-time SMS and email alerts for pump failures, pressure drops, and tank levels
Installs inside existing pump control panels — no new enclosures needed
Fraction of the cost of traditional agriculture monitoring systems
View Products Talk to Our Team
AccuDose vs. Traditional Agriculture Monitoring
Precision ag platform cost $$$$$
Specialized installer required Often required
On-site network / gateway Required
Time to deploy Days to weeks
AccuDose deployment Hours. No programming.
AccuDose cost vs. alternatives Fraction of the cost
The Problem

Farm operations span miles — monitoring shouldn’t require it

Modern farms run complex infrastructure across large geographic areas. Irrigation pump stations, agricultural wells, water storage tanks, and fertilizer systems are spread across fields that can span thousands of acres — and most of it runs with little to no real-time visibility.

When an irrigation pump fails mid-season, a fertilizer tank runs dry, or a pressure line breaks overnight, the problem often isn’t discovered until the next scheduled inspection — or until crop damage is already done.

Precision agriculture platforms exist but are expensive, complex to configure, and built for large commercial operations with dedicated IT support. Smaller farms and mid-size growers are left with disconnected sensors, manual checks, and gut instinct.

Irrigation pump failures go undetected A pump that trips offline overnight can leave acres unirrigated for hours before anyone knows — during critical growth periods, that delay matters.
Fertilizer and chemical tanks run empty Without tank level monitoring, fertilizer injection systems can run dry mid-application — resulting in uneven coverage, wasted crop inputs, and reduced yield.
Manual inspections across large farms are expensive Driving routes to check pump houses, tank levels, and well status takes labor time that doesn’t scale — especially as farm operations grow.
Precision ag systems are too complex for most farms Enterprise precision agriculture platforms require dedicated setup, proprietary hardware, and ongoing support contracts — a poor fit for operations that just need reliable remote visibility.
Traditional Agriculture Monitoring — Typical Limitations
Precision ag platform cost $10,000 – $40,000+
On-site network / gateway required Required
Specialized installer / integrator Often required
Annual software / subscription fees $1,500 – $8,000/yr
Disconnected standalone sensors No unified visibility
Manual inspection frequency Days between visits
Real-time pump failure alerts Not available
Deployment time Days to weeks
The Solution

Industrial-grade farm monitoring.
Without the complexity.

AccuDose delivers real-time monitoring for agricultural infrastructure using built-in LTE-M cellular — no on-site gateways, no network wiring across fields, no precision agriculture platform to configure and maintain.

Install AccuDose inside an existing pump control panel or equipment enclosure, connect it to your existing sensors and equipment signals, and you’re transmitting live data to the cloud within the hour. Pump failures, pressure drops, and tank level alarms go out immediately by SMS and email.

Farm managers get full visibility across irrigation systems, agricultural wells, tanks, and fertilizer equipment — from any device, from anywhere — without driving the farm to check on it.

Feature
Legacy Systems
AccuDose
Analog Monitoring
Yes
Yes
Real-Time Alarms
Yes
Yes
Historical Logging
Yes
Yes
On-Site Network Required
Required
Not needed
Complex Configuration
Required
Not needed
Plug-and-Play Setup
No
Yes
Lifetime Warranty
No
Yes
Cost vs. Alternatives
Baseline
Fraction of the cost
Global LTE-M Cellular
Built-in SIM connects across Verizon, AT&T, and T-Mobile. Works at remote pump houses and well sites with no on-site internet.
Analog & Digital I/O
Monitor 4–20mA pressure, flow, level, and soil moisture sensors alongside digital pump run and alarm contacts from the same unit.
Industrial Enclosure
NEMA4X / IP67 rated housing built for outdoor agricultural environments — UV exposure, moisture, dust, and temperature extremes.
Lifetime Warranty
Every AccuDose platform ships with a lifetime hardware warranty — built to hold up in remote agricultural infrastructure environments.
Monitoring Applications

Every farm application.
AccuDose handles them all.

From irrigation pump stations to greenhouse environments, AccuDose delivers real-time monitoring and alarm coverage across the full range of agricultural remote monitoring applications.

Irrigation Pump Stations
Monitor pump run status, discharge pressure, flow rate, motor faults, and power status at remote irrigation pump stations across large farm operations.
Pump run, fault & runtime
Discharge pressure & flow rate
Motor fault & VFD alarms
Power fail detection
Irrigation System Monitoring
Track mainline pressure, zone flow rates, and system run status in real time. Detect pressure drops, leaks, and zone failures before they affect crop coverage.
Mainline pressure monitoring
Zone flow rate & run status
Pressure drop & leak detection
Water usage trending
Agricultural Water Tanks
Continuously monitor storage tank levels, detect low-level conditions before they interrupt irrigation cycles, and track fill and draw rates over time.
Tank level (analog continuous)
Low-level alarm triggers
Fill & draw rate trending
Transfer pump run & fault
Fertilizer & Chemical Storage
Monitor fertilizer and chemical tank levels in real time. Get alerted before tanks run dry during application cycles and track consumption rates across the season.
Tank level (analog continuous)
Low-level & empty alarms
Injection pump run & fault
Consumption rate trending
Soil Moisture Monitoring
Connect 4–20mA soil moisture sensors to AccuDose analog inputs for continuous soil moisture trending — enabling data-driven irrigation scheduling and reducing water waste.
Continuous soil moisture trending
Multi-zone moisture monitoring
Low-moisture alarm triggers
Historical data for scheduling
Greenhouse Environments
Monitor temperature, humidity, irrigation system status, and power at greenhouse facilities. Get alerted immediately to conditions that threaten crop health.
Temperature & humidity monitoring
Irrigation system run status
Power fail detection
High/low temperature alarms
Remote Well Monitoring
Monitor agricultural well pump run status, discharge pressure, pump current, and power failure at remote well sites without requiring on-site visits to confirm operation.
Well pump run & fault status
Discharge pressure monitoring
Pump current monitoring
Power fail detection
Typical Deployment

Monitor any site on the farm
without leaving the office

AccuDose installs inside an existing pump control panel or equipment enclosure. No new conduit runs, no network wiring across fields, no separate hardware cabinet to mount outdoors.

Connect AccuDose to the sensors and equipment signals that already exist at the site — flow meters, pressure transmitters, pump run contacts, tank level sensors — power it on, and it connects to the cellular network automatically.

Farm managers can begin monitoring irrigation systems, wells, and tanks from the cloud dashboard within the same day. When something goes wrong, the alarm reaches them by SMS or email before the next scheduled drive-by would have caught it.

1
Mount inside pump control panel
AccuDose mounts inside the existing pump house control panel or equipment enclosure — no new hardware cabinet required.
2
Wire to existing sensors and signals
Connect flow meters and pressure transmitters to analog inputs. Wire pump run contacts, fault signals, and alarms to digital inputs.
3
Power on and activate cellular
AccuDose connects automatically to the strongest available carrier — Verizon, AT&T, or T-Mobile. No SIM management or network setup required.
4
Begin monitoring immediately
Live data appears in the cloud dashboard within minutes. Set alarm thresholds and notification contacts from any device — phone, tablet, or desktop.
5
Scale across the entire operation
Every additional pump station, well, or tank deploys the same way. All sites appear in one unified dashboard — no additional software or servers required.
Operational Benefits

Better data.
Better growing seasons.

Real-time monitoring gives farm managers the visibility to act on equipment issues immediately — reducing water waste, protecting crop yield, and cutting the time spent driving the farm to check on things manually.

Reduce Manual Inspections
Know the status of every pump station, well, and tank before sending anyone out. Route field visits based on actual equipment data, not fixed schedules.
Catch Pump Failures Immediately
Irrigation pump trips, motor faults, and power outages generate instant SMS and email alarms — not discovered hours later on the next manual drive-by.
Optimize Irrigation Efficiency
Soil moisture trending and flow rate data give managers the information to irrigate based on actual field conditions — reducing water usage and improving application timing.
Protect Crop Yield
Catching irrigation failures, pressure drops, and fertilizer tank outages within minutes — rather than days — directly protects yield during critical growing periods.
One Dashboard for the Entire Farm
Every pump station, well, tank, and greenhouse in one unified cloud dashboard — accessible from anywhere. No more driving the property to confirm system status.
Scale Across the Operation
Deploy AccuDose across every site on the farm at a fraction of what precision agriculture platforms cost. Every site deploys the same way — no per-site programming required.
Ready to Get Started

Bring your farm infrastructure
into real-time visibility

See which AccuDose platform is right for your irrigation systems, agricultural wells, pump stations, fertilizer tanks, and greenhouse environments — or talk to our team about your specific application.

View Products